Brother PT-9200DX Printer User Manual


 
15
Replacing, installing or deleting the printer driver
(for Windows
®
95/98/Me/NT 4.0/2000 Professional/XP)
For a serial connection
1 Connect the PT-9200DX to the computer using the
enclosed serial interface cable as described on page
4, and then turn on the PT-9200DX.
2 Insert the P-touch Editor Version 3.1 CD-ROM into
the computers CD-ROM drive. A dialog box appears,
allowing you to select what to install.
If the dialog box does not automatically appear,
double-click My Computer on the desktop, and
then double-click the CD-ROM drive containing the
CD-ROM. (For Windows
®
XP, click My Computer in
the Start menu, and then double-click the CD-ROM
drive containing the CD-ROM.) Next, double-click
Ptsetup.exe to display the dialog box.
3 Click the bottom button (Printer driver). A dialog box
appears, allowing you to select the model.
4 Click the icon for the PT-9200DX. The first Driver
Setup dialog box appears, allowing you to select
whether a serial or a USB connection is used.
5 Select Serial cable, and then click the OK button. A
dialog box appears, allowing you to select whether to
install or uninstall the printer driver.
6 Select the desired operation, and then click the Next
button.
7 If Install was selected: Perform steps 3 through 7 in
the section
For a Serial Connection
on page 8.
If Uninstall was selected: A dialog box appears,
asking for confirmation to uninstall the PT-9200DX
printer driver.
Click the Next button. A dialog box appears, showing
that the printer driver has been deleted.
Click the Next button. A dialog box appears, showing
that uninstallation is finished.
Select Yes, I want to restart my computer now.,
click the Finish button to restart the computer, and
then remove the CD-ROM from the computer.