Filter
Top Products
99
You can use the memory to store your most frequently used text files, TZ tape layouts or AV
label layouts. The text remains in the memory, along with its formatting, even after all characters
are removed from the display using the Clear function (holding down c and pressing * ).
When each file is stored, it is given a number to make recalling it easier. Up to 100 text files,
TZ tape layouts and AV label layouts each or approximately 4,000 characters can be stored in
the memory. (A single file can have a maximum of 272 characters.)
Since a copy of the stored text file is recalled when the Recall function is used, the text can be
edited or printed without changing the originally stored file. When a file is no longer needed
or more space is necessary, the Memory delete function can be used to delete it. With the
Memory print function, either a single file or multiple files stored in the memory can be
quickly selected for printing.
☞ When inserting new batteries, be sure to insert the new ones within five minutes of
removing the old ones, otherwise any text files stored in the memory will be lost (unless
the machine is plugged into an electrical outlet with the AC adapter).
STORING TEXT
To store a text file:
1 Hold down c and press 7. The message “STORE” appears on the display with the
first available file number.
4
Press p (or _ ).
☞ If CUT MENU was set to AFTER LAST, the string of three labels would not
be cut off until after the last one is printed.
2/ 3
COPIES
1/ 3
COPIES
3/ 3
COPIES
TZ-Tape
AV-Label
MEMORY FUNCTIONS