Filter
Top Products
11
STEP
1
STEP
2
STEP
3
Getting started
Reference Installing the software
Introduction
• Check that the electrical outlet is 120V AC before plugging the power cord.
• Do not connect the TD-4000/4100N to the computer until directed to do so when
installing the printer driver.
• Unplug the power cord from the electrical outlet after you have finished using the
TD-4000/4100N.
• Do not pull the power cord when unplugging it from the electrical outlet. The wire in
the power cord may become damaged.
1
Check that the main power switch is turned
off.
2
Connect the power cord to the
TD-4000/4100N.
3
Plug the power cord into an electrical outlet.
4
Turn the main power switch on.
6 Connecting the Power Supply
Off
The plug may differ by countries.