Brother TD4100N Printer User Manual


 
31
STEP
1
STEP
2
STEP
3
Getting started
Reference
Introduction
Installing the software
When printing via the USB
cable, the printer repeatedly
pauses and then continues
printing.
Is the printer set for sequential printing?
If so, set print mode to buffered printing. (Open printer
properties from [Control Panel] - [Printers (2000) / Printer and
FAX (XP) / Hardware and Sound - Printers (Windows Vista
®
)]
and click [Printing Preferences...] button in the [General] tab.
Choose the option "After one page of data is received".)
An alternative solution is to disconnect the LAN cable until USB
printing is completed.
An error occurred when the roll
cannot be fed to the beginning
of the label.
The procedure for feeding to the beginning of the label is
different for die cut labels and continuous length label. See
"Setting the RD Roll" on page 12.
When using die cut labels with a length of 6" (152.4mm) inches
or more, an error may occur if the TD-4000/4100N cannot
detect the beginning of the label after the first time that the roll
is fed. To clear the error, press the Feed button again.
Problem Solution