Filter
Top Products
23
STEP
1
STEP
2
STEP
3
Getting started
Reference Installing the software
Introduction
Setting your IP address, Subnet Mask and Gateway using
BRAdmin Light
1
Click [Start]-[All Programs(Programs)]-
[Brother]-[BRAdmin Light]. BRAdmin Light
will search for new devices automatically.
If you have a DHCP/BOOTP/RARP server in your
network, you don’t have to do the following
operation. Because the print server will
automatically obtain its IP address.
2
Double-click the unconfigured device.
The default password is "access".
3
Choose STATIC for the Boot Method. Enter
the IP Address, Subnet Mask and Gateway,
and then click [OK].
4
The address information will be saved to the printer.