Filter
Top Products
Page 16 Matrix Switching System—Instruction Manual
Examples for Selecting Matrix Switching Functions:
Example 1 (Audio and Video Switching): Using a SW808HD matrix having all the
input/output ports properly connected to the equipment. There are two methods to
set channel 1 audio/video to channels 2, 3 and 5 as output and channel 3 audio/video to
channel 6 for output:
First method: In the lower right corner of the blue area, enable the Video and
Audio functions (check the white boxes). To complete the switching operation,
directly click on the corresponding icons on the matrix to turn them into .
Second method:.
The following 3 steps sets the switching operation of Audio/Video input channel 1 to
output channels 2, 3 and 5 while at the same time switch Audio/Video input channel
3 to output channel 6.
Step 1: In the lower right corner of the blue area, enable the Video and Audio
functions (check the white boxes),
Use the lower scroll bar to view
additional columns