Filter
Top Products
Matrix Switching System—Instruction Manual Page 21
Exit Function Description
Used to exit the operating software.
Other Usages
Displays the presently saved switching status as shown below:
This table shows the Video/Audio Input ports
corresponding to the Output ports. When a port is
closed, ZERO will be shown in that box.
Communication Protocol and Control Command Code
Communication Protocol:
Baud rate 9600bps
No, odd, or even parity
8-bit transmission address
1 bit stop address.
Refer to the "Command list.pdf" on the CD-ROM for the command system.
Matrix System Technical Parameters
Model
Parameters
SW808HD SW404HD
Video
Enhancement 0-dB
Bandwidth 1 50MHz (-3dB), Full Load
Max. Transmission Delay
20nS (±1nS)
Switching Speed 50nS (Longest Time)
Signal Type Component/Composite Video
Video Input
Connector 8 RCA Female Connectors 4 RCA Female Connectors
Signal Strength 1 Vp-p Y Component Video, S-video, Composite Video; 0.3Vp-
p R-Y & B-Y Component Video, S-video
Min./Max. Voltage Modulated Signal 0.5V~2.0Vp-p