Filter
Top Products
Matrix Switching System—Instruction Manual Page 17
Step 2: First select the Output number keys 02, 03 and 05 to the right, and select the
Input number key 01 to the bottom.
Then, consecutively press the previously selected Output number keys 02, 03 and
05 (or press the Deselect all output key). This selects Input 01 to be routed to
Outputs 02, 03, and 05.
Step 3: First select the Output number key 06 to the right, and select the Input number
key 03 to the bottom.
Then, press the previously selected Output number key 06 (or press the Deselect
all output key). This selects Input 03 to be routed to Output 06.
Example 2 (Video Only Switching):: Using a SW808HD matrix having all the
input/output ports properly connected to the equipment. To set the input/output
connectors to switching from video channel 1 to output channels number 1, 6 and 7 and also
to switch from audio channel 2 to output channel 8. There are two ways of operations:
First method: In the lower right corner of the blue area, enable the Video and
disable the Audio functions (check/uncheck the white boxes). To complete the
switching operation, click on the corresponding icons corresponding directly
to the INPUT number key 01 and the OUTPUT number keys 01, 06, and 07 on the
matrix to turn them into .
Second method:
The following 4 steps, completes the operation of switching video channel 1 to output
channels 1, 6, and 7 while also switching audio channel 2 to output channel 8.
Step 1: In the lower right corner of the blue area, enable the Video and disable
the Audio functions (check/uncheck the white boxes).
Step 2: Select the output number keys 01,06 and 07 to the right and select the input
number key 01 to the bottom.
Then, press the previously pressed output number keys 01, 06, and 07 to the right
(or press the Deselect all output key). This selects video switching of input 01 to
output 01,06 and 07.
Step 3: In the lower right corner of the blue area, disable the Video and enable
the Audio functions (uncheck/check the white boxes).
Step 4: Select output number key 08 to the right and input number key 02 to the
bottom. Then, press again the previously pressed output number key to the right
(or press the Deselect all output key). This selects audio switching of input 02 to
output 08.