Filter
Top Products
Vipersat Configuration
3-34 Vipersat CDM-570/570L User Guide
• Enter the TOS SCPC Switch Data Rate - Enter the desired data rate for
this service type. Valid entries are from 0 to 10,000 Kbps. This setting will
override the VMS set policy value.
• Enter the TOS SCPC Timeout - This timer monitors the defined packet
flow. Once data stops for the duration of the timer setting, the link state
will be restored to the home state condition. Valid entries are from 1 to 60
seconds.
After entering the timeout value, pressing the Enter key will update the TOS
Switching Control menu with the changes.
Delete
Enter D at the command prompt in figure 3-41 to Delete a ToS entry, as shown
in figure 3-43.
Figure 3-43
ToS Delete prompt
Note: The value shown in the TOS Value column is the TOS ID associ-
ated with the ToS entry to be deleted.
View
Entering a V at the command prompt will display the Internal TOS Table for
active entries as shown in figure 3-44.
Note that, due to binary conversion, the ID value is a multiple of 4 and the
Timout value is a multiple of 2.
Figure 3-44
ToS View screen
NOTE