Cabletron Systems 2200 Switch User Manual


 
Installation 3-1
3
Installation
This chapter provides the instructions required to install the 2E253-49R. A Phillips screwdriver is
required to install options into the device or install the device into a rack. Follow the order of the
sections listed below to correctly install the device.
Unpacking the Device (Section 3.1)
Installing Options (Section 3.2)
Installing the Device (on a shelf or tabletop, or into a standard rack) (Section 3.3)
Connecting to the Network (Section 3.4)
Completing the Installation (Section 3.5)
Only qualified personnel should install the 2E253-49R.
NOTE
Read the Release Notes shipped with the device to check for any exceptions to the
supported features and operation documented in this guide.