Filter
Top Products
Unpacking the Device
3-2 Installation
3.1 UNPACKING THE DEVICE
Unpack the device as follows:
1. Open the box and remove the packing material protecting the 2E253-49R.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the tape seal on the non-conductive bag to remove the 2E253-49R.
4. Perform a visual inspection of the device for any signs of physical damage. Contact Cabletron
Systems if there are any signs of damage. Refer to Section 1.2 for details.
3.2 INSTALLING OPTIONS
If the 2E253-49R is to be installed with an optional HSIM or VHSIM, refer to the user’s guide of
that device for the installation instructions. To install an optional SIMM, refer to Appendix B.
Table 3-1 Contents of 2E253-49R Carton
Item Quantity
2E253-49R 1
Antistatic Wrist Strap 1
Console Cable Kit 1
RJ21 Angle Adapter 4
Rackmount Kit 1
Strain-Relief Bracket 1
Manual Accessory Kit 1
Power Cord 2
NOTE
Install any optional equipment before proceeding to Section 3.3.