Filter
Top Products
Connecting to the Network
Installation 3-5
.
Figure 3-2 Connecting a Fiber Optic Segment to the SmartSwitch
Connect a fiber optic segment to the SmartSwitch as follows:
1. Remove protective covers from the fiber optic segment or MT-RJ port.
2. Connect the fiber optic segment to the SmartSwitch by inserting the MT-RJ connector into the
desired port until the release tab catches, as shown in Figure 3-2.
NOTE
Leave protective covers on the fiber optic cable or fiber optic ports until they are
connected to protect the connectors from dust and dirt. If a segment is removed from
the SmartSwitch, the protective covers should be replaced until the segment is
re-installed.
CPU
6H253-17
Fast Enet
RESET
Receive
(RX) LED
Transmit
(TX) LED
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
C
O
M
Fiber Optic Cable
MT-RJ Port
Release Tab
8
6H258-17