Filter
Top Products
Troubleshooting Checklist
4-8 Troubleshooting
Table 4-5 Management System Troubleshooting
Possible Causes Instruction
Improper Community
Names Table.
1. Refer to your Local Management User’s Guide for
Community Names Table setup.
2. If the Community Names have been forgotten, refer to
Section B.1 for instructions on clearing NVRAM.
The SmartSwitch does not
have an IP address.
1. Refer to your Local Management User’s Guide for IP
address assignment procedure.
2. If the SmartSwitch are using the IP address of the 6C105
chassis, ensure that the modules are not in STANDALONE
management mode. Your Local Management User’s Guide
provides instructions on setting the management mode.
The applicable front panel
port is disabled.
1. Enable port. Refer to the Local Management User’s Guide
for instructions on enabling/disabling ports.
2. Port may disabled due to Spanning Tree. Review network
design and delete unnecessary loops.