Filter
Top Products
INDEX
CSMIM-T1 Hardware Installation Guide INDEX-7
originate mode register 7-45
P
parity check command 7-29
parity option register 7-49
parity, set by command 7-28
pause
before dial 7-43
during dial 7-8
for dial delay 7-44
pause dial modifier 7-8
pause time for dial delay 7-44
phone line quality 6-7
ping command 3-18
point to new register 7-41
poor telephone line connections 7-17
port pin/signal allocations A-1
port speed
modem 7-4
serial 7-15
ports command 3-19
power level, cellular 7-24
power levels for cellular calls 7-24
power-up
applying power 2-9
failures during 2-9
instructions 2-9
self-testing procedures during 2-9
power-up diagnostics 6-2, 6-16
power-up diagnostics, start 6-16
preferred load host setting 3-5
primary XOFF character 7-53
primary XON character 7-53
product code display 7-17
prompt 7-1
protocol command settings 6-10
protocol connection matrices 6-11
protocols used by modem 6-2
protocols, overview 6-7
pulse dial command 7-29
pulse dial modifier 7-7
pulse dialing 7-7
pulse dialing, digits 7-37
pulse digit command 7-37
Q
quick connect cellular calls 6-6
quiet answer 7-8
quiet command 7-30
quiet dial modifier 7-8
R
RARP 2-11
rate negotiation timer 7-56
reading
configuration register 7-32, 7-41
modem status 7-33
redial 7-11
redial last number command 7-10
register
commands 7-41
display value of 7-41
read all 7-32, 7-41
reading 7-41
register, change value 7-41
register, read S 7-32
registers, overview 7-41
registers, point to new 7-41
registers, read all 7-41
registers, read specific 7-41
registers, reading 7-32
reliable
connection 7-5, 7-6, 7-36
link 6-21, 7-3, 7-35, 7-36
reliable mode dial modifier 7-10
reliable mode, set 7-25
remote digital loopback 6-18, 7-34
respond to 7-34
with self-test 7-34
remote digital loopback by
command 6-18
remote digital loopback with
self-test 6-17
remote digital loopback,
respond 6-19
remote test commands 7-33