Filter
Top Products
3-6
Configuring Your ELS10-26
Using LCM to enable bridging for a port or port range, at the LCM
prompt:
1. Type
bridge [PORT-RANGE [{off|on|noBPDU}]]
For example, bridge 2 on would enable bridging on port 2.
LCM responds:
3.3 DISABLING BRIDGING
To turn off the bridging function for a port or port range, at the
LCM prompt:
1. Type
bridge [PORT-RANGE] off
For example, bridge 2 off would disable bridging on port 2.
LCM responds:
3.4 DISPLAYING BRIDGING FUNCTIONS
To display the bridging functions that are enabled for all ports, at
the LCM prompt:
1. Type
bridge
LCM responds with a list of all ports and the bridging function
that is enabled. For example, typing
bridge would display the
bridging status for all ports.
Port 2 bridging: Transparent Bridging
Port 2 bridging: off