![](http://pdfasset.owneriq.net/c/f4/cf4e46f0-1c89-49b0-a477-ca07b84907ea/cf4e46f0-1c89-49b0-a477-ca07b84907ea-bg54.png)
4-14
Monitoring and Managing Your ELS10-26
To change the baud rate setting, at the LCM prompt:
1. Type baud <baud rate>
For example, baud 9600 would set the baud rate to 9600.
LCM responds:
4.5.6 Setting a Reboot Time
You can enter the number of seconds the ELS10-26 waits before
rebooting. At the LCM prompt:
1. Type
reboot <time interval>
For example, reboot 60
LCM responds:
Baud rate is 9600.
Reboot pending in 59 seconds.