Filter
Top Products
Appendix A: EPIM Information
A-2 SEH100TX User’s Guide
A.1.2 EPIM-100FX
The EPIM-100FX shown in Figure A-2 supports Multimode Fiber Optic
cabling. The EPIM-100FX is equipped with an SC style connector.
Specifications for the EPIM-100FX are listed in Table A-1.
Figure A-2 EPIM-100FX
The transmitter power levels listed above are peak power levels after
optical overshoot. A peak power meter must be used to correctly compare
the values given above to those measured on any particular port. If power
levels are being measured with an average power meter, add 3 dBm to the
measurement to compare the measured values to the values listed above.
Table A-1 Transmitter Power (EPIM-100FX)
Cable Type Worst Case Budget Typical Budget
50/125 µm fiber optic 6.0 dB 9.0 dB
62.5/125 µm fiber optic 9.0 dB 12.0 dB
100/140 µm fiber optic 15.0 dB 18.0 dB
EPIM 1
5X
4X
3X
2X
1X
16X
15X
14X
13X
12X
EPIM-
100FX
LNK
1510_10
EPIM 2