Filter
Top Products
Appendix A: EPIM Information
A-4 SEH100TX User’s Guide
Table A-2 provides the specifications for the EPIM-100FMB.
Table A-2 Transmitter Power (EPIM-100FMB)
The transmitter power levels and receive sensitivity levels listed are peak
power levels after optical overshoot. A peak power meter must be used to
correctly compare the values given above to those measured on any
particular port. If power levels are being measured with an average power
meter, add 3 dBm to the measurement to compare the measured values to
the values listed above.
Cable Type Worst Case Budget Typical Budget
50/125 µm fiber optic 6.0 dB 9.0 dB
62.5/125 µm fiber optic 9.0 dB 12.0 dB
100/140 µm fiber optic 15.0 dB 18.0 dB