Filter
Top Products
Chapter 4: Installation
4-4 SEHI100TX User’s Guide
Rack mounting the SEHI involves the following:
• Attaching the strain-relief bracket
• Rack mounting the SEHI
• Stacking the SEHI when applicable
Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the SEHI as follows:
1. Locate the strain-relief bracket and four 8-32 x 3/8-inch pan-head
screws from the rackmount kit.
2. Attach the strain-relief bracket to the bottom of the SEHI (Figure 4-3).
.
Figure 4-3 Attaching the Strain Relief Bracket
WARNING
Before installing the SEHI into a rack, ensure that the rack can
support the device(s) without compromising the stability of the
rack. Otherwise, personal injury and/or equipment damage
may result.
Do NOT attempt to attach the strain-relief bracket with screws
other than the 8-32 x 3/8-inch screws included with the SEHI.
Use of longer screws may damage the unit or cause
electrical shock.
Strain-Relief Bracket
Screws (4)
1511_19
PWR
CPU
CLN
HubSTACK
100BASE-TX HUB
WITH
LANVIEW®
SEHI
100TX-
22
22X 21X 20X 19X 18X 17X
11X 10X 9X 8X 7X 6X
16X 15X 14X 13X 12X
5X 4X 3X 2X 1X
E
1
E
2
RCV
LNK
RCV
LNK
22 21 20 19 18 17 16 15 14 13 12
11 10 9 8 7 6 5 4 3 2 1
EPIM
1