Filter
Top Products
Chapter 7: Local Management
7-4 SEHI100TX User’s Guide
Console Cable Configuration
Use the RJ45 Cable Kit provided with the SEHI to attach the management
terminal to the SEHI COM port as shown in Figure 7-1.
Connect the console cable to the SEHI as follows:
1. Attach the male RJ45 connector to the COM port of the SEHI.
2. Attach the female end (25-pin or 9-pin, as applicable) to the COM port
on the terminal.
Figure 7-1 Management Terminal Connection
Management Terminal
Console Cable
COM RJ45 Port
COM Port
1511_14
HubSTACK 100BASE-TX HUB WITH LANVIEW®
SEHI100TX-22
COM