Filter
Top Products
Fax (D1180/D1170/D1150)
6-35
Standard Send Settings
Standard Send Settings
This mode enables you to specify the standard scan settings for density and resolution.
Storing the Standard Send Settings
You can change and store the Standard Send
Settings. The default settings are as follows:
<DENSITY>: <STANDARD>
<RESOL
UTION>: <200 × 200 dpi>
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <TX/RX
COMMON SET.>, then press [OK].
2 . T X / R X C O M M O N S E T .
T X / R X S E T T I N G S
4
Press or to select <TX SETTINGS>,
then press [OK].
1 . T X S E T T I N G S
T X / R X C O M M O N S E T .
5
Press or to select <STANDARD
SETTINGS>, then press [OK].
5 . S T A N D A R D S E T T I N G S
T X S E T T I N G S
–
–
6
Press or to select the desired
setting item, then press [OK].
1 . D E N S I T Y
S T A N D A R D S E T T I N G S
You can specify the following settings:
<DENSITY>: Adjusts the density of
documents. (See “Adjusting Density,
” on p. 6-
29.)
<RESOLUTION>: Adjusts the image quality of
documents. (See “Selecting Image Quality,” on
p
. 6-30.)
7
Each time you set the desired setting
item, press [OK].
S T A N D A R D
D E N S I T Y
8
Press [Stop/Reset] to return to the
standby mode.
Restoring the Standard Send
Settings to Their Default
You can restore the Standard Send Settings to their
original default settings.
1
Press [Menu].
–
–