Filter
Top Products
Before Using the Machine
1-19
Timer Settings
Setting the Auto Clear Time
If the machine remains idle for a certain period of
time, the display returns to the standby mode (Auto
Clear function). This section describes how to set
the period of time until the display returns to the
standby mode. The default settings is <2MIN>.
1
Press [Menu].
2
Press or to select <TIMER
SETTINGS>, then press [OK].
7 . T I M E R S E T T I N G S
M E N U
3
Press or to select <AUTO CLEAR
TIME>, then press [OK].
5 . A U T O C L E A R T I M E
T I M E R S E T T I N G S
4
Press or to select <ON>, then
press [OK].
O N
A U T O C L E A R T I M E
5
Press or to select the desired
interval, then press [OK].
2 M I N .
A U T O C L E A R T I M E
You can set the interval from 1 to 9 minutes (in
one minute increments).
You can also enter values using
– [numeric
keys].
6
Press [Stop/Reset] to return to the
standby mode.
Setting the Daylight Saving Time
In some countries or areas, time is advanced
throughout the summer season. This is called
“Daylight Saving Time.” This section describes how
to set the Daylight Saving Time. The default setting
is <OFF>.
1
Press [Menu].
2
Press or to select <TIMER
SETTINGS>, then press [OK].
7 . T I M E R S E T T I N G S
M E N U
3
Press or to select <DAYLIGHT
SV.TIME>, then press [OK].
6 . D A Y L I G H T S V . T I M E
T I M E R S E T T I N G S
4
Press or to select <ON>, then
press [OK].
O N
D A Y L I G H T S V . T I M E
5
Press or to select <START DATE/
TIME>, then press [OK].
1 . S T A R T D A T E / T I M E
D A Y L I G H T S V . T I M E
6
Press or to select <MONTH>,
then press [OK].
1 . M O N T H
S T A R T D A T E / T I M E