Filter
Top Products
Copying
3-24
2-Sided Copying
2-Sided Copying
This mode enables you to make 2-sided copies from 1-sided or 2-sided originals, or make 1-
sided copies from 2-sided originals. This enables you to cut print costs in half when copying
in large quantities. This feature can be used together with both “Collating Copies”
(see p. 3-
19) and “2 on 1 Combination”
(see p. 3-21). The default setting is <OFF>.
Paper used to make 2-sided copies must conform to the following specifications:
Paper size: LTR, A4 and LGL (envelopes cannot be used for 2-sided copying)
Paper weight: 16 to 32 lb (60 to 120 g/m
2
)
Make sure to close the sub-output tray before making 2-sided copies.
Do not open the sub-output tray while making 2-sided copies.
When making 2-sided copies, make sure to confirm that the paper size switch lever on the rear side of the machine is set
to the appropriate position. Paper jams may occur if the lever is not set appropriately. For details on how to set the paper
size switch lever, see “Setting the Paper Size Switch Lever,” on p. 2-16.
–
•
•
–
–
–