Filter
Top Products
33
4
5
C
Network Connection
Conrm Connection Status
Select Wireless LAN setting list or Wired LAN setting list, then press the OK button.Select Conrm LAN settings, then press the OK
button.
Now the machine is connected to the network.
Next, read "[Network Connection] Install the Software" on page 34.
The machine and network device are turned on.−
Make sure that Connection is set to Active, then press the HOME button.
It may take a while before the connection is complete. In this case, press the Back button (C) and wait for about
a minute, then display the Wireless LAN setting list screen or Wired LAN setting list screen again.
There is no obstacle between the machine and access point, and wireless communication is possible.−
There is no microwave, refrigerator or any other object that may cause radio interference nearby.−
For wired connections, the Ethernet cable is connected properly.−
If the communication status does not improve, make sure of the following.•