Filter
Top Products
1
A
C B
C
D
2
5
Hardware Setup
Install the Print Head
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B)
until it stops.
Handle the Print Head carefully. Do not
drop or apply excessive pressure to it.
•
The Print Head Holder makes a noise as it moves. This is normal operation.•
Close the Document Cover (C) and lift it with the Scanning Unit (Cover).
If the Print Head Holder does not move, make sure that the machine is turned on.•
Make sure that the Print Head Holder
(D) moves to the installation position.