Filter
Top Products
1
2
A
C
B
3
4
D
F
E
4
Hardware Setup
Turn the Power On
Plug the power cord into the back
left of the machine, then connect
the other end to the wall outlet.
When the above
screen is displayed,
press the OK button
and go to the next
step.
Do NOT connect the USB cable or
Ethernet cable at this stage.
•
The machine may make some operating
noises. This is normal operation.
•Make sure that the Document Cover
(A) is closed.
•
Open the Operation Unit (B) and
press the ON button (C) to turn on the
machine.
Use the
{
or
}
button (D) on the Operation
Panel to select the language for the LCD (E),
then press the OK button.
If an unintended language is displayed on the LCD, press the Back button (F) to return to
the Language selection screen.
•
Hardware Setup