Filter
Top Products
9-16
CLEAR PAPER JAM There is a paper jam. Clear the paper jam (see p. 9-
1) and reload paper in the
multi-purpose tray. Press
[Stop].
DATA ERROR An error has occurred and all
one-touch speed dialing, coded
speed dialing, and user data
have been lost.
Press [Start/Copy], then re-
register the data (see Chapter
2).
DOC. TOO LONG The document is longer than
700 mm.
Use a copier to make a
reduced copy of the document
and then send the copy.
ECM RX The fax is receiving a document
using Error Correction Mode
(ECM).
ECM receptions may take
longer than normal receptions.
Turn off ECM if you need to
receive quickly, or if you know
your local lines are in good
condition (see ECM RX, p. 8-
4).
ECM TX The fax is sending a document
using Error Correction Mode
(ECM).
ECM transmissions may take
longer than normal
transmissions. Turn off ECM if
you need to transmit quickly,
or if you know your local lines
are in good condition (see
ECM TX, p. 8-3).
MEMORY FULL The fax’s memory is full because
it has received too many
documents, or a very long or
detailed document.
Print any documents stored in
memory (see p. 5-14).
Then start again.
The fax’s memory is full because
you either tried to send or copy
too many pages at once, or you
tried to send or copy a very long
or detailed document, using
memory sending.
Free up space in the fax’s
memory by printing or deleting
any documents in memory you
no longer need (see pp. 5-14,
5-15).
If multiple pages are loaded,
separate the pages into
smaller stacks. If not, try
sending the document by
direct sending (see p. 5-2).
MSG DATA LOST An error has occurred and all
voice message data has been
lost.
Re-record all answering
machine messages, such as
the outgoing message and
alternative outgoing message
(see p. 7-1).
Message Cause Action