Filter
Top Products
5-13
SENDING DOCUMENTS
5
Sequential broadcasting
Sending a document to more than
one location ____________________________________
Sequential broadcasting sends one document to more than one location.
You can send to a total of 80 locations as follows:
• One-touch speed dialing = 9 locations
• Coded speed dialing = 70 locations
• Regular dialing (Numeric buttons dialing) = 1 location
You can enter the one-touch speed dialing and coded speed dialing locations in any order. You
simply press the one-touch speed dialing button, or press [Coded Dial/Directory] followed by
the two-digit code.
You can also include one location using regular dialing. Remember that when using regular
dialing, you must press [Start/Copy] after entering the number.
You must press each button within 10 seconds of the preceding one. The fax begins the operation
approximately 10 seconds after you press the last button.
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2
Dial the receiving party’s fax numbers as you need.
You can also press [Redial/Pause] to redial the last number dialed with the numeric buttons.
3
Press [Start/Copy].
• The fax reads the document into memory and begins sending.
• To cancel a transmission, press [Stop] during dialing or transmission. All transmissions in the
sequence are canceled.
TEL= 3456xxxx