Filter
Top Products
8-4
RX SETTINGS
PRINTER SETTINGS
Name Description Settings
ECM RX Enable/disable error correction during reception. ON/OFF
FAX/TEL AUTO SW This feature is used to answer calls, and if no fax tone is
detected, the fax rings to alert you of an incoming call.
–
RING START TIME Set the duration that the fax listens for a fax tone before
starting to ring.
0 to 30 seconds
F/T RING TIME Set the length of time the fax will ring to alert you of an
incoming call.
10 to 60 seconds
DEFAULT ACTION Select the action taken after the F/T RING TIME expires. DISCONNECT/
RECEIVE
INCOMING RING Set the fax to ring when it receives a call. ON/OFF
RING COUNT Set the number of incoming rings before the fax answers. 1 to 99 times
MAN/AUTO SWITCH Determine if the fax switches to document receive mode after
the fax rings for a specified time when the fax is in the manual
receive mode.
ON/OFF
RING TIME Set the amount of time the fax will ring before switching to
document receive mode.
1 to 99 seconds
REMOTE RX Enable/disable remote receiving. ON/OFF
REMOTE RX ID If you set REMOTE RX to ON, you can select the remote
receiving ID.
00 to 99
MEMORY RX Turn on/off memory receiving of a document. ON/OFF
Name Description Settings
RX REDUCTION Enable/disable reduction for received documents. ON/OFF
FIXED REDUCTION Select the reduction rate. STANDARD/
A4→LTR/
LGL→LTR
REDUCE DIMENSION Select reduction in height only or both width and height. VERTICAL ONLY/
HORIZ & VERTICAL
PAPER SIZE Select the size of the loaded fax paper. A4/LGL/LTR