Filter
Top Products
Settings Menu
3-42
3
Printer Settings Menu
IMPORTANT
Please note that if the print position is adjusted to place the digits of the copy
numbers outside the printable area, the portion outside the printable area is not
printed.
NOTE
•
This function is only available if 'Copy Set Numbering' is set to [On].
•
This setting is only effective for the print position of copy numbers. When adjusting
print position (other than the copy numbers), perform the setting with 'Offset Short
Edge/Offset Long Edge'. (See p. 3-24 to p. 3-25.)
Personality
Auto
*
, PS, PCL, Imaging, and PDF1.5
This setting enables the machine to process data received from the host
computer in the specified data format. Setting the 'Personality' to [Auto] makes the
machine determine the type of data received from the host on a job-by-job basis.
If you are printing from applications on a computer, we recommend that you use
the [Auto] setting.
NOTE
•
If you find that the machine does not correctly switch to the appropriate personality
when 'Personality' is set to [Auto], change the setting manually to match the data
you are sending from the host computer.
•
This function is not available when printing in the UFR II Printer.
Mode Priority
None
*
, PS, PCL, and PDF1.5
This setting determines which personality should be used if a job is received
without a specified command language or Direct Print data. 'Mode Priority' is used
when 'Personality' is set to [Auto].
None
This does not specify a preferred personality. If a job is received without a
specified command language or Direct Print data, the current personality is used.
The default setting is [None].
PS
This assigns priority to the PS personality.
PCL
This assigns priority to the PCL personality.