Filter
Top Products
Settings Menu
3-26
3
Printer Settings Menu
Auto Continue
On, Off
*
This setting enables you to automatically clear an error and continue printing
when an error occurs (Error skip).
If [On] is selected, error skips are performed automatically.
If [Off] is selected, you must perform error skips from the touch panel display.
NOTE
•
For instructions on performing an error skip from the touch panel display, see
"Skipping an Error during Printing," on p. 2-25.
•
Error skip only temporarily clears an error, so the data may not print correctly.
•
For information on types of errors that can be temporarily cleared with Auto
Continue, see "When a Message Is Displayed," on p. 6-4.
•
This setting is valid even if multiple errors have occurred.
Job Securing Time
1 hour
*
, 2 hours, 3 hours, 6 hours, 12 hours, and 24 hours
When a secured print job is sent to the machine, it is stored on the machine's hard
disk, and a password must be entered before the job can be printed. This setting
specifies how long the job will be stored before it is automatically canceled.
NOTE
•
Even if the time period specified with this setting has not elapsed, the print job data
is deleted if the main power to the machine is switched OFF or if you reset the
printer. (See "Reset Printer," on p. 3-100.)
•
The password is set from the printer driver.