Filter
Top Products
3.3.6 Removal of red screws prohibited
Since adjustment of the following red screws is very difficult in the field, they must
not be loosened or removed.
(a) The two paper spacing red screws (one on the right and left).
(b) The two screws securing the paper feed motor.
3.3.7 Installing the logic board cover
If the logic board cover is installed incorrectly, the logic board and paper feed rollers
will be obstructed and the ASF motor may go out of sync.
Note that prong A is prone to engage incorrectly. Make sure that it fits in correctly.
Part 2: Troubleshooting
S600
2-18
a
b
a
A
Figure 2-8 Installing the Logic Board Cover
Figure 2-7 Do not Remove the Red Screws