Filter
Top Products
1.3 Operating the Printer
The printer has an offline operation mode that works when the printer is not connected
to a computer and the power is on.
To conduct the operations below, with the power turned on, hold down the
RESUME
button until the green indicator blinks for the specified number of times.
1.3.1 Cleaning operation
To start the cleaning operation, turn on the printer and hold down the
RESUME
button
until the green indicator blinks once. Then let go of the button. Cleaning will then start.
The black and color ink nozzles will be cleaned simultaneously by suction. This is the
same as using the printer driver to clean all of the ink nozzles.
1.3.2 Printing the nozzle check pattern
With the printer turned on, hold down the
RESUME
button until the green indicator
blinks twice. The printer will then start printing the nozzle check pattern. If any
printing flaws show up in this test printout, clean the BJ cartridge.
Printing the nozzle check pattern requires B5 or larger paper. If the
paper's width is narrower than the nozzle check pattern, the printer will
print on the bare platen, dirtying the platen with ink.
To stop printing of the test pattern midway, press the
POWER
button.
Printing will stop and the paper will be ejected. The printer will remain on.
If the problem persists even after cleaning the BJ cartridge three times,
Perform Deep Cleaning of from the driver. If that still does not resolve the
problem, replace the BJ cartridge.
Part 2: Troubleshooting
S600
2-2
Operation
Cleaning operation
Nozzle check pattern
printing
Roller cleaning
operation
---
Indicator Blink Count
Once
Twice
3 times
4 times
Remarks
---
Load a sheet of B5 or larger
paper.
Load no paper or load A4 paper.
Execute no operations.