Filter
Top Products
3.4.3 Print head position adjustment
The print head has two nozzle arrays for each color. Therefore, it requires the ink
landing position adjustments described in (1) and (2) below in addition to the usual
bi-directional adjustment described in (3).
(1) Landing position adjustment between two same-color arrays
• Black-Black array (A)
• Cyan-Cyan array (B)
• Magenta-Magenta array (C)
(2) Landing position adjustment between two different-color arrays
• Black-cyan/Magenta/Yellow (F)
(3) Bi-directional landing spot adjustment (Same as with previous models)
• Black bi-directional (D)
• Color bi-directional (E)
If the landing spot position is inaccurate, the pattern printing will show overlapping
printing or gaps, resulting in black or white stripes.
Therefore when doing the adjustment, use a pattern that has no stripes.
Load one sheet of A4 paper in the auto sheet feeder, then use the printer driver to
execute printing.
2-23
S600
Part 2: Troubleshooting
Troubleshooting
Figure 2-12 Printing Position Adjustment Pattern