Filter
Top Products
2.4 Troubleshooting Error Indications
1) Error indication when a user-resolvable error occurs
The indicator lights in green, then blinks in orange. This repeats.
Check the number of blinks and proceed to correct the error.
2) Error indication when an error not resolvable by the user occurs
The indicator toggles between orange and green (orange/green toggle blinking). This
repeats.
Check the number of toggled blinks and proceed to correct the error.
*1: The error code is displayed by the computer. With the iMac and Power Macintosh
G3, a "D" or "M" is appended to the beginning of the error code.
*2: The waste-ink warning can be canceled by pressing the
RESUME
button.
*3: Press the
RESUME
button to resume operation.
Table 2-1 ERROR INDICATIONS
Indicator Error Status Probable Cause and Faulty Parts
Blink Count Code*
1
User-Recoverable Errors
<Cause>
1. No paper was loaded.
2. During feeding, the paper did not reach the
paper-end sensor.
3. During feeding, the paper's bottom edge
missed the paper-end sensor.
4. The ASF sensor did not return to its initial
position and the paper-end sensor concluded
that there was no paper. (ASF motor may be
out of sync.)
<Suspect Part>
Paper feed section, sheet feeder unit, paper-end
sensor, control board
<Cause>
1. The paper-end sensor still detects the presence
of paper even after 23 inches of paper ejection
operation.
2. The ASF sensor did not return to its initial
position and the paper-end sensor concluded
that there was no paper. (Out of sync.)
3. During paper feeding abnormal timing caused
the paper-end sensor to still detect paper.
<Suspect Part>
Paper feed section, paper-end sensor, control
board
<Cause>
The respective ink tank has run out of ink (in the
tank and sponge).
<Suspect Part>
Ink tank
Orange
2 blinks
Orange
3 blinks
Orange
4 blinks
--- Paper feed error
--- Paper jam error
--- No-ink error*
3
Part 2: Troubleshooting
S600
2-10