Canon Canon S600 Standard Color Printer for Personal Use Printer User Manual


 
6. INK SUCTION AMOUNT IN THE CLEANING MODE
The printer has five cleaning modes (A to G). Cleaning is executed for maximum
effectiveness and efficiency. The cleaning operation is selected depending on the
respective condition. The ink suction operation differs depending on the condition at
three occasions: Operation by the user, cover open/closing, and before printing starts.
• Operation by the user: Manual ink suction (Including printer driver operation)
• Cover open/closing: Cleaning at printer arrival
• Before printing starts: Other than manual suction
*1 If the preconditions overlap, the stronger suction will take priority.
Cleaning A < Cleaning D < Cleaning E < Cleaning F < Cleaning G
*2 In the case of the boxed preconditions, the suction starts right after the precondition
is executed. For other preconditions, suction is executed right before the printing
starts or during printing.
*3 Ink tank replacement is detected when the ink tank's status changes from H to L.
*4 Printing of EEPROM contents, etc., with the printer alone.
*5 Purging operations will be performed after 24 hours only the first 5 times, after which
purging will occur at 60 to 336 hours intervals.
When checking the functions of the purge unit, measure the suction
amount for a manual suction.
3-23
S600
Part 3: Technical Reference
Technical
Reference
Mode Suction Precondition*
Amount (g)
Cleaning A All colors Bk+Cl 0.15+0.36 Dot count suction, Manual suction (All colors) *
2
,
timer suction (Time not set)*
4
Bk Bk 0.15 Dot count suction, Manual suction (Bk) ,
timer suction (60*
5
~ 336 h)
Cl Cl 0.36 Dot count suction, Manual suction (Cl) ,
timer suction (120 ~ 336 h)
Cleaning D All colors Bk+Cl 0.3+0.72 Tank replacement*
3
after soft power ON
(All colors)
Bk Bk 0.3 Tank replacement*
3
after soft power ON (Bk)
Cl Cl 0.72 Tank replacement*
3
after soft power ON (Cl)
Cleaning E All colors Bk+Cl 0.45+0.72 Long timer suction (336 h ~)
Cleaning F All colors Bk+Cl 0.45+1.08 When print head is replaced, at printer arrival
Cleaning G All colors Bk+Cl 1.5+1.08 Head refreshing