Canon CP900 Printer User Manual


 
9
O Use only dedicated paper included in the genuine Canon brand Color Ink Cassette/Paper Sets
for use in SELPHY CP series printers. Regular printing paper, regular postcards, or dedicated
paper for SELPHY ES series printers cannot be used.
O Never do the following. This may damage the printer or cause the printer to malfunction.
- reverse the paper (the glossy side is the print side)
- bend or separate the paper at the perforations before printing
- use label sheets that have begun to peel or label sheets with
portions peeled
- write on a sheet before printing
- reuse paper for printing on the blank part (p. 5).
O Do not touch the springs on the paper cassette.
If the springs are bent or deformed, paper will not feed correctly
into SELPHY.
O One spring is attached at the center of the top surface on card
sized paper cassettes.
O Take care not to touch or rub the print (the glossy) side of the
paper, not to handle the paper with wet hands, and not to get any
dust or dirt on the paper. Dirt and water drops may cause lines on
photos, poor print quality, or damage the printer (p. 5).
Attaching the Dust Protection Cover
By attaching the dust protection cover DPC-CP100, you can prevent dust or dirt from accumulating on the
paper. The dust protection cover may not be included in some regions. Purchase separately if required.
O Insert the dust protection cover as shown in the
illustration.
O In a place with a lot of dust or dirt, or outdoors, the dust protection cover may not be able to
prevent dust or dirt from accumulating on the paper, so take care to select a clean environment
when using SELPHY.
O Store the dust protection cover in a bag to prevent dust when not using.
Spring
COPY