Filter
Top Products
H
E
B
D
F G
C
11
4 Install the Software
When the serial number is not
displayed on the registration screen
automatically, input the serial
number located inside the printer
(as shown in the illustration).
Necessary Information for the
User Registration
□
If the power is on, the
Print Head Holder will
move when the Top Cover
(H) is opened.
•
Load a sheet of supplied specialty paper for Print
Head Alignment (Matte Photo Paper MP-101) in the
Rear Tray (B) and click Execute. For details, refer
from in "5 Load Paper" on page 15.
Make sure that the Paper Output Tray (C) and
Output Tray Extension (D) are opened.
Print Head Alignment□
Important Information for the Installation
When the blue and black pattern (E) shown is
printed, Print Head Alignment is now complete.
In Windows, click Next on the Print Head
Alignment screen.
If the Alarm lamp (orange) (F) ashes,
press the RESUME/CANCEL button (G)
on the printer to clear the error, then click
Next. After the installation is complete,
perform Print Head Alignment by referring
to "When Printing Becomes Faint or Colors
Are Incorrect" in the on-screen manual:
Basic Guide.
•
Wait until the pattern printing ends (about
5 minutes).
•