Filter
Top Products
4 5 6 7
F
E
G
H
7
3 Install the Ink Tanks
Tilt the ink tank, then insert it
under the label and against
the back end of the slot.
Press the PUSH mark on the
ink tank rmly until it clicks.
When the installation is
completed properly, the Ink
lamp lights red.
Install all the other ink tanks
in the same way according to
the color order indicated on
the label.
Make sure that the color of the
label matches the ink tank.
Close the Top Cover (E).
The POWER lamp (green) (G) flashes for about 5
minutes, then stays lit. Wait until the lamp stays lit
and go to the next step.
•
If the Alarm lamp (H) ashes orange, make sure
that the Print Head and the ink tanks are correctly
installed.
•
Make sure the Inner Cover (F) is closed.