Filter
Top Products
1
2
3
A
5
4
B
2
1 Preparation
When removing the power plug, make sure that the POWER lamp is
not lit before removing the plug. Removing the power plug while the
POWER lamp lights up or ashes may cause drying and clogging of
the Print Head, resulting in poor printing.
•
When it is necessary to turn off the printer
Be sure to follow the procedure below.
It may take up to 35 seconds until the printer turns off.
1. Press the ON button to turn off the printer.
2. Make sure that the
POWER lamp is not lit.
Insert the power cord
into the connector on the
printer and into the wall
outlet rmly.
Do NOT connect
the USB cable at
this stage.
•
Press the ON
button (A) to turn
on the printer.
Make sure that
the POWER lamp
(B) lights green.
The specication of the power cord differs for each country or region.•