Filter
Top Products
3
1 2 3
A
B
C
D
6
Install the Ink Tanks
1. Remove the orange tape
completely.
2. Remove the protective lm
completely.
Handle the ink tanks carefully. Do not drop or apply excessive pressure to
them.
Be sure to use the supplied ink tanks.
If the orange tape remains on the L-shape air hole, ink may splash or the
printer may not print properly.
If you push the sides of the ink tank with the L-shape air hole blocked, ink
may splash.
•
•
•
•
Hold the ink tank with the orange
protective cap (A) pointing up while
being careful not to block the L-
shape air hole (B).
Do not touch the inside (C) of the orange protective cap or
the open ink port (D). The ink may stain your hands if you
touch them.
•
Hold the ink tank by its sides and slowly twist the orange
protective cap 90 degrees horizontally to remove it off.
Do not push the sides of the ink tank.