Filter
Top Products
Loading Paper
2-4
Routine Maintenance
2
NOTE
•
For high quality printouts, use paper recommended by Canon.
•
Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding. Also,
you should always fan paper that has just been removed from a newly opened paper package.
4
Load the paper stack into the paper drawer.
Even out the edges of the paper stack. Load the paper
stack against the right wall of the paper drawer.
When loading paper into the paper drawer for the first
time, set the paper size dial to match the paper size
being loaded. (See "Adjusting a Paper Drawer to Hold a
Different Paper Size," in the Reference Guide.)
When loading paper into the paper drawer, make sure
that the paper size setting is the same size of the paper
that is being loaded.
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark ( ) at the back of
the paper drawer.
•
When loading 305 x 457 mm paper in the paper drawer, remove the left guide and insert it into the hole
in the front left side of paper drawer.
NOTE
•
Each paper drawer holds approximately 550 sheets of paper (80 g/m
2
).
•
For more information on the print direction of preprinted paper (paper which has logos or patterns
already printed on it), see "Relationship between Original Orientation and Preprinted Paper Output
Chart," in the Reference Guide.