Filter
Top Products
21Sending Faxes
3 Use [{] or [}] to select <SCAN CONTRAST>, then press [Start/Copy]. The LCD
displays <STANDARD>.
4 Use [{] or [}] to adjust the scanning contrast, then press [Start/Copy].
You can select <STANDARD>, <DARKER> or <LIGHTER>.
5 Press [Stop].
Setting ends and the fax returns to standby mode.
Automatic Dialing
Sending a Document Using One-Touch Speed Dialing or Coded Speed
Dialing Numbers
To use this feature you must first register numbers for one-touch speed dialing (see page 13) or
coded speed dialing (see page 14).
1 Load the document face up into the Document Tray.
See “Loading Documents and Paper” on page 16.
You can set the scanning resolution and the contrast (see page 20).
2 Press the one-touch speed dialing button under which the number you wish to fax
is registered.
-or-
Press [Coded] and enter the appropriate two-digit coded speed dialing code.
The registered name and number appear.
If you make a mistake, press [Stop]. Then press the correct one-touch speed dialing button or
press [Coded] and re-enter the code.
3 Press [Start/Copy].
The fax begins sending.
-or-
After about 10 seconds of no operation panel input, the fax starts sending automatically.
01=CANON
01=CANON