Filter
Top Products
25Sending Faxes
6 Use the numeric buttons, or [{] or [}] to enter the number of times you want the
fax to redial, then press [Start/Copy] twice. The LCD displays <2MIN.>.
7 Use the numeric buttons, or [{] or [}] to enter the time interval between redialing
attempts, then press [Start/Copy].
8 Press [Stop].
The fax returns to standby mode.
Delayed Sending
Your fax can send a document automatically at a preset time. This allows you to take advantage of
lower late-night long-distance rates offered by some telephone companies.
The fax can only register one preset sending operation at a time.
1 Load the document face up into the Document Tray.
See “Loading Documents and Paper” on page 16.
You can set the scanning resolution and contrast (see page 20).
2 Press [Menu].
3 Use [{] or [}] to select <FAX OPTIONS>, then press [Start/Copy].
4 Use [{] or [}] to select <DELAYED TX>, then press [Start/Copy].
5 Enter the desired sending time (in 24-hour clock format) using the numeric buttons.
z Precede single digits with a zero.
z Press [Clear] if you need to re-enter the time.
z You can also use [[] or []] to move the cursor.
6 Press [Start/Copy].
7 Enter the receiving party’s fax number.
z You can enter the receiving party’s fax number by using the numeric buttons, one-touch
speed dialing, coded speed dialing, or directory dialing (see page 21).
z If you use the numeric buttons, press [Start/Copy] after entering the number to register it.
8 Press [Start/Copy].
z Press [Start/Copy] when using directory dialing.
z The fax scans the document into memory.
Note
If <MEMORY FULL> appears on the LCD during scanning, delete unnecessary documents from
the memory (see page 35), then rescan your fax.
SET TIME 15:00