Canon LV-7365 Projector User Manual


  Open as PDF
of 83
 
29
3. Projecting an Image (Basic Operation)
❹
Correcting Keystone Distortion
Correcting Keystone Distortion
If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following
steps to correct keystone distortion
NOTE: The Keystone correction can cause an image to be slightly blurred because the correction is made electronically.
NOTE: The Keystone correction range can be made narrower, depending on a signal or its aspect ratio selection.
NOTE: Turning off the projector will cause your manual keystone adjustments to return to "0". To save your manual keystone ad-
justments, select [Keystone save] from the menu. See page 48.
Adjusting with buttons on the cabinet
1.PresstheSELECT or buttonwithnomenusdisplayed

2.UsetheSELECT
or tocorrectthekeystonedistortion.

NOTE: When the menu is displayed, the above operation is not available. When the menu is displayed, press the MENU button to
close the menu and start the Keystone correction.
From the menu, select [Setup]
→
[General]
→
[Keystone adjustment]. The changes can be saved with [Keystone save]. (
→
page 48)
Adjusting with the Remote Control
1.PresstheMENUbutton.

2.PresstheSELECT
buttontoselect[Setup]andpresstheOKorSELECT button.
3.PresstheSELECT
buttontoselect[Keystoneadjustment]fromthe[General]tab.
4.PresstheSELECT
or button.

5.PresstheMENUbutton.
The menu will be closed.
TIP: The changes can be saved with [Keystone save]. (
→
page 48)
 previous next