Filter
Top Products
22
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use
of the projector.
A PIN code consists of a four-digit number. Refer to the
PIN code lock function in the Setting Menu on pages
60-61 for locking operation of the projector with your PIN
code.
Use the Point ▲▼ buttons to enter a number. Press the
Point ► button to fix the number and move the red frame
pointer to the next box. The number changes to . If
you fixed an incorrect number, use the Point ◄ button to
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer
to “Set”. Press the OK button so that you can start to
operate the projector.
If you entered an incorrect PIN code, and the
number () will turn red for a moment. Enter the
correct PIN code all over again.
If you forget your PIN code, the projector can no longer
be started. Take special care in setting a new PIN code.
Write down the number as a reminder. Should the PIN
code be missing or forgotten, consult your dealer or
service center.
After the OK icon disappears, you
can operate the projector.
•If the PIN code number is not entered or wrong
PIN code number is entered within three
minutes after the PIN code dialog box appeared,
the projector will be turned off automatically.
•The “1234” is set as the initial PIN code at the
factory.