Canon LV-7390 Projector User Manual


 

39


This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

True
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1280 x 800), the projector enters to the
panning mode automatically. Use the Point ▲▼◄►
buttons to pan the image. When adjusted, the arrows
will turn red. When reached to the correction limits,
the arrows will disappear.
Full
Provide the full screen image.

• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to
the projector.
• The image data in other than 1280x800 is
modified to fit the screen size in initial mode.
, True and  are
disabled and cannot be displayed when ,
575i, ,  , 1035i or  is
selected in the PC System Menu (p.31).
• When True is selected in the Screen menu,
 can not be selected.
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
 and then press the Point or the OK
button.
Use the Point ▲▼ buttons select the desired
item and then press the OK button .

Provide the last stored aspect screen image.

Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually with
this function. Press the Point button at  .
and the Custom adjustment menu is displayed on the
screen, you can use the Point ▲▼ buttons to choose
the item you want to adjust.
 .......... Adjust the Horizontal/Vertical
screen scale.
H&V ................... When set to On, the aspect ratio
is fixed. The  appears
dimmed and becomes unavailable.
Adjust , then the screen
scale is automatically modified
based on the aspect ratio.
 ..... Adjust the Horizontal/Vertical
screen position.
 ........... Save the adjusted scale or position
to all the inputs. Press the OK
button at  to display a
confirmation box. To save the scale
or position, press the OK button at
“Yes”. When  is selected,
the saved scale or position is used.
Reset ................. Reset the all adjusted values.
Press the OK button at Reset to
display a confirmation box. To
reset, press the OK button at “Yes”.


• When no signal is detected,  is set
automatically .
• The adjustable range for  and
 is limited depending on the
input signal.

Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
