Canon LV8227M Projector User Manual


 
11



Connect the composite video output signal
to this jack (p.18).


Connect output signal from a computer,
component video output, RGB scart 21-
pin video output or S-VIDEO output to this
terminal (pp.17-19).

Connect an external audio amplifier to this
jack (pp.17-19).
This terminal outputs sound from AUDIO
IN terminal or , or HDMI terminal
(digital audio).
Never plug headphones and earphones into
AUDIO OUT jack.

When the projector is controlled by a
computer, connect to this jack with serial
control cable.

Connect the HDMI signal (including sound
signal) from video equipment or from
computer to this terminal (p.17-18).
HDMI, the HDMI logo and High Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing,
LLC.

Connect the audio output signal from
computer or video equipment connected to
to this jack. Or connect the MIC to this
jack (pp.17-19).

Connect the audio output signal from video
equipment connected to to this jack. For
a mono audio signal (a single audio jack),
connect it to L(MONO) jack (p.18).

Connect the LAN cable (refer to the user’s
manual of “Network Set-up and Operation”).
(LAN Connection Terminal is only for
LV-7292A, LV-7297A, LV-7392A, LV-8227A.)

When using AUDIO IN(PC/MIC) terminal
as MIC input, these terminals can be used
for PC audio input.