Filter
Top Products
63
This function returns all setting values except
for the , ,
, and
to the factory default settings.
This function records anomalous operations
while the projector is in operation and use it
when diagnosing faults. Up to 10 warning logs
are displayed with the latest warning message
at the top of the list, followed by previous
warning messages in chronological order.
When the Factory default function is executed, all
the warning log records will be deleted.
This function is used to set a frequency for the
filter cleaning.
Use the Point ▲▼ buttons to select Filter
counter and then press the Point ► or the OK
button to access the submenu items.
......... Show the total
accumulated time
of the filter use timer
setting.
..................... To set a timer, when the
projector reaches the
time, the Filter warning
icon (Fig.1) appears
on the screen and the
total accumulated time
turns red, indicating that
the filter replacement is
necessary.
... After replacing the filter,
be sure to reset the timer.
The Filter warning icon
will not turn off until the
filter counter is reset. For
details about resetting the
timer, refer to “Resetting
the Filter Counter” on
page 66.
Press the OK button to select
, and then use the Point ▲▼
buttons to set the timer. Select
from ()
depending on the use environment.
Filter warning icon appears on the screen at a
set time (/2000H/3000H/4000H).
Fig.1 Filter warning icon
• This icon also appears at turning on.
• The Filter warning icon (Fig.1) will not appear
when the Display function is set to (p.53),
during (p.28), or (p.29).