Filter
Top Products
ENG-16
■Fine Adjustment
Loosen the same screws that were used in the distortion adjustment and finely
adjust the angle so that the projected image fits the screen, then tighten all the
screws (i.e., a total of 14 including the inclination axis screws).
After the adjustments, check that the ceiling-mounting hanger
and the projector are fixed securely.
Specifications
ProductName: Ceiling-mountinghanger
Model: LV-CL15
Adjustmentangle: Up-downangle+/−10°
Left-rightangle+/−10°
Inclinationangle+/−10°
Dimensions: 327(W)×166(D)×88(H)mm
(whenassembled,notincludingprotrudingparts)
Weight: Approximately1.3kg
SuppliedItems: Fixedceilingpart...............................................1
Projectormountingadapter.............................. 1
Projectormountingscrews(M4)....................... 3
Up-downangleadjustmentscrews(M5)...........4
Anti-fallwires....................................................2
Installationmanual............................................1
Specificationsandappearancearesubjecttochangewithoutnotice.
Adjustment of the Projection Angle